Název: | Identification of parameters of cohesive elements for modeling of adhesively bonded joints of epoxy composites |
Autoři: | Kottner, Radek Hynek, Richard Kroupa, Tomáš |
Citace zdrojového dokumentu: | Applied and Computational Mechanics. 2013, vol. 7, no. 2, p. 137-144. |
Datum vydání: | 2013 |
Nakladatel: | University of West Bohemia |
Typ dokumentu: | článek article |
URI: | http://www.kme.zcu.cz/acm/index.php/acm/article/view/220/234 http://hdl.handle.net/11025/10674 |
ISSN: | 2336-1182 (Online) 1802-680X (Print) |
Klíčová slova: | lepený spoj;epoxidové kompozity;model konečných prvků |
Klíčová slova v dalším jazyce: | adhesively bonded joint;epoxy composites;finite element model |
Abstrakt: | Adhesively bonded joints can be numerically simulated using the cohesive crack model. The critical strain energy release rate and the critical opening displacement are the parameters which must be known when cohesive elements in MSC.Marc software are used. In this work, the parameters of two industrial adhesives Hunstman Araldite 2021 and Gurit Spabond 345 for bonding of epoxy composites are identified. Double Cantilever Beam (DCB) and End Notched Flexure (ENF) test data were used for the identification. The critical opening displacements were identified using an optimization algorithm where the tests and their numerical simulations were compared. |
Práva: | © 2013 University of West Bohemia. All rights reserved. |
Vyskytuje se v kolekcích: | Volume 7, number 2 (2013) Články / Articles (KME) Články / Articles (NTIS) Volume 7, number 2 (2013) |
Soubory připojené k záznamu:
Soubor | Popis | Velikost | Formát | |
---|---|---|---|---|
220-1852-1-PB[1].pdf | Plný text | 1,4 MB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/10674
Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.