Full metadata record
DC poleHodnotaJazyk
dc.contributor.authorHammerbauer, Jiří
dc.contributor.authorŠtork, Milan
dc.contributor.editorPinker, Jiří
dc.date.accessioned2021-10-27T10:37:47Z
dc.date.available2021-10-27T10:37:47Z
dc.date.issued2021
dc.identifier.citation2021 International Conference on Applied Electronics: Pilsen, 7th – 8th September 2021, Czech Republic, p. 47-50.en
dc.identifier.isbn978–80–261–0972–3 (Print)
dc.identifier.isbn978–80–261–0973–0 (Online)
dc.identifier.issn1803–7232 (Print)
dc.identifier.issn1805–9597 (Online)
dc.identifier.urihttp://hdl.handle.net/11025/45564
dc.format4 s.cs
dc.format.mimetypeapplication/pdf
dc.language.isoenen
dc.publisherUniversity of West Bohemiaen
dc.rights© University of West Bohemia, 2021en
dc.subjectpřevodník buckcs
dc.subjectboost konvertorcs
dc.subjectindukční energiecs
dc.subjectztráta zatíženícs
dc.subjectpřepětícs
dc.subjectochranacs
dc.titleOutput Overvoltage in DC-DC Switching Converters in Case of Sudden Unloadingen
dc.typeconferenceObjecten
dc.typekonferenční příspěvekcs
dc.rights.accessopenAccessen
dc.type.versionpublishedVersionen
dc.description.abstract-translatedIn present time the high efficiency switching DC/DC converters, e.g. buck and boost are often used. This work describes some problems of DC-DC converters, which can occur, when the load is suddenly disconnected or simultaneous disconnection of the load and the capacitor at the output. The results were derived both by simulation but also by measurement. A special measuring system has been developed for these measurements, which enables the realization of fault conditions. Therefore, measurements were performed on 2 different types of DC-DC converters. The results of simulations and measuring are presented in the work. Error conditions usually cause an overvoltage that can damage the equipment connected to the converter. A solution how to prevent overvoltage and thus damage connected systems is also described.en
dc.subject.translatedbuck converteren
dc.subject.translatedboost converteren
dc.subject.translatedinductor energyen
dc.subject.translatedload lossen
dc.subject.translatedovervoltageen
dc.subject.translatedprotectionen
dc.type.statusPeer-revieweden
Vyskytuje se v kolekcích:Konferenční příspěvky / Conference Papers (KEI)
Applied Electronics 2021
Applied Electronics 2021

Soubory připojené k záznamu:
Soubor Popis VelikostFormát 
Output_Overvoltage_in_DC-_DC_Switching_Converters_in_Case_of_Sudden_Unloading.pdfPlný text822,27 kBAdobe PDFZobrazit/otevřít
Zobrazit minimální záznam Zobrazit statistiky


Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam: http://hdl.handle.net/11025/45564

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.

hledání
navigace
  1. DSpace at University of West Bohemia
  2. Publikace ZČU / UWB Publications
  3. Sborníky ZČU / UWB Proceedings
  4. Applied Electronics
  5. Applied Electronics 2021