Title: The influence of the shape of a saw-cut notch in quasi-brittle 3PB specimens on the critical applied force
Authors: Seitl, Stanislav
Řoutil, Ladislav
Klusák, Jan
Veselý, Václav
Citation: Applied and Computational Mechanics. 2008, vol. 2, no. 1, p. 123-132.
Issue Date: 2008
Publisher: University of West Bohemia
Document type: article
článek
URI: http://www.kme.zcu.cz/acm/old_acm/full_papers/acm_vol2no1_p013.pdf
http://hdl.handle.net/11025/1769
ISSN: 1802-680X (Print)
2336-1182 (Online)
Keywords: řezání;betony;lomová mechanika;výpočetní metody ve fyzice
Keywords in different language: cutting;concretes;racture mechanics;computational methods in physics
Abstract: Values of fracture parameters of quasi-brittle building materials are usually determined from results of tests performed on notched testing specimens. The contribution deals with the influence of various shapes of tips of notches prepared by a diamond saw in three point bending (3PB) specimens. The influence of the notch tip shape on the applied force corresponding to a failure initiation at the notch tip and also on the critical applied force appropriate to the maximal load-bearing capacity of the specimen is studied. Calculations are performed in two finite element method (FEM) systems (ATENA, ANSYS) based on two different approaches to fracture description (Cohesive crack models and LEFM, respectively). The numerical results obtained by both FEM systems are compared. The influence of notch shapes and width is quantified.
Rights: © 2008 University of West Bohemia. All rights reserved.
Appears in Collections:Volume 2, number 1 (2008)
Volume 2, number 1 (2008)

Files in This Item:
File Description SizeFormat 
acm_vol2no1_p013.pdf996,74 kBAdobe PDFView/Open


Please use this identifier to cite or link to this item: http://hdl.handle.net/11025/1769

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.