Title: Influences of cutting process parameters on the cutting quality when water jet cutting
Authors: Zetková, Ivana
Jeníček, Štěpán
Hronek, Ondřej
Kotěšovec, Vratislav
Vrtáček, Jiří
Zetek, Miroslav
Citation: ZETKOVÁ, , JENÍČEK, Š., HRONEK, O., KOTĚŠOVEC, V., VRTÁČEK, J., ZETEK, M. Influences of cutting process parameters on the cutting quality when water jet cutting. In: Annals of DAAAM and Proceedings of the International DAAAM Symposium. Vídeň, Rakousko: DAAAM International Vienna, 2018. s. 1286-1292. ISBN 978-3-902734-20-4 , ISSN 1726-9679.
Issue Date: 2018
Publisher: DAAAM International Vienna
Document type: konferenční příspěvek
conferenceObject
URI: 2-s2.0-85060084654
http://hdl.handle.net/11025/31141
ISBN: 978-3-902734-20-4
ISSN: 1726-9679
Keywords in different language: water jet;cutting process;parameters change;quality of the cut
Abstract in different language: The article analyses unconventional technology of water jet cutting and its impact on the cutting quality. A series of experiments were done to determine the effects of the used materials and their cut thickness on the final surface integrity, within the experimental program. Steels 1.1191 (12 050 according to ČSN) and 1.2379 (19 573 according to ČSN) were used for the experiment. Steel 1.1191 was selected, because this material is a standard for the steels machinability. Steel 1.2379 was chosen, because it belongs to a group of materials, which are difficult to machine. Therefore, it is possible to compare the cut quality of two steels with different properties. Also it was cut into the samples of different thickness. Thicknesses were chosen to make it clear, how the abrasive beam will handle a thick or thin workpiece wall. This article, the study of the integrity machined surface by progressive AWJ technology contributed to the influence evaluation of the material thickness during water jet cutting. The corrections for the cutting optimization and their influences to the cutting process were used in the experiment.
Rights: © DAAAM International Vienna
Appears in Collections:Konferenční příspěvky / Conference Papers (RTI)
OBD



Please use this identifier to cite or link to this item: http://hdl.handle.net/11025/31141

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

search
navigation
  1. DSpace at University of West Bohemia
  2. Publikační činnost / Publications
  3. OBD