Název:	Application of thermography in cyclic load and thermal shock testing of steel components with ceramic coatings deposited by cascaded plasma torch
Autoři:	Burdová, Karolína Antoš, Jakub Kučerová, Ludmila Stehlík, Adam
Citace zdrojového dokumentu:	KUČEROVÁ, Ludmila ed.; JIRKOVÁ, Hana ed.; JENÍČEK, Štepán ed. Proceedings PING Junior 2021 - Modern Trends in Material Engineering 13–16 September 2022, Pilsen. 1. ed. Pilsen: University of West Bohemia, 2021, p. 12-13. ISBN 978-80-261-1042-2 .
Datum vydání:	2021
Nakladatel:	University of West Bohemia
Typ dokumentu:	conferenceObject konferenční příspěvek
URI:	http://hdl.handle.net/11025/46336
Klíčová slova:	termografie;cyklické zatížení;tepelný šok;plazmový nástřik;keramický
Klíčová slova v dalším jazyce:	thermography;cyclic load;thermal shock;plasmy spraying;ceramic
Abstrakt v dalším jazyce:	Behaviour of ceramic coatings deposited on steel substrate was tested by cyclic loading and thermal shock. Both tests of ceramic coatings were observed with thermographic camera TIM400. Three different ceramics: Al2O3, Cr2O3 and Cr2O3-5SiO2-3TiO2 were deposited by plasma cascade torch SinplexPro. Relation between temperature and stress and reactions to thermal shocks were inspected. Frequency of 10 Hz, step of 20 MPa and stress ratio R0,1 were used for cyclic load testing. Load was increased every 10 minutes until the specimen fractured. The influence of diverse ceramic coatings on fatigue limit is determined. Thermal shock temperatures were selected based on properties of coating material. To reach desired temperature, resistance heating was used and afterwards compressed air cooled the specimens.
Práva:	© University of West Bohemia
Vyskytuje se v kolekcích:	Proceedings PING 2021: modern trends in material engineering Proceedings PING Junior 2021 - modern trends in material engineering

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.