Full metadata record
DC pole | Hodnota | Jazyk |
---|---|---|
dc.contributor.author | Jesenik, Marco | |
dc.contributor.author | Hamler, Anton | |
dc.contributor.author | Trlep, Mladen | |
dc.date.accessioned | 2014-07-16T12:09:46Z | - |
dc.date.available | 2014-07-16T12:09:46Z | - |
dc.date.issued | 2013 | |
dc.identifier.citation | ISTET 2013: International Symposiumon Theoretical Electrical Engineering: 24th – 26th June 2013: Pilsen, Czech Republic, p. IV-29-IV-30. | en |
dc.identifier.isbn | 978-80-261-0246-5 | |
dc.identifier.uri | http://hdl.handle.net/11025/11514 | |
dc.description.abstract | The purpose of this paper was to find the geometry of a crack within a conductive plate and its parameters, on the basis of non-destructive testing, using eddy currents. The input data represents the measured values of magnetic flux density within the centre of the excitation coil. The position of a crack can be determined by taking into consideration any change in the magnetic flux density between the measured points. The depth and width are determined through the use of a finite-element model. These calculations are the basis for determining a function that explains how magnetic flux density changes if the depth or width has changed. After wards, through the Newton-Raphson iterative procedure using the finite-element method calculation results, the crack depth and width can be obtained. The suitability of the presented method was verified by the experimental example. | en |
dc.format | 2 s. | cs |
dc.format.mimetype | application/pdf | |
dc.language.iso | en | en |
dc.publisher | University of West Bohemia | en |
dc.relation.ispartofseries | ISTET: International Symposium on Theoretical Electrical Engineering | en |
dc.rights | © University of West Bohemia | en |
dc.subject | modelování | cs |
dc.subject | vířivý proud | cs |
dc.subject | metoda konečných prvků | cs |
dc.subject | nedestruktivní testování | cs |
dc.title | Finding a Crack’s Position and its Parameters on the basis of Non-Destructive testing, using Eddy Currents | en |
dc.type | konferenční příspěvek | cs |
dc.type | conferenceObject | en |
dc.rights.access | openAccess | en |
dc.type.version | publishedVersion | en |
dc.subject.translated | modelling | en |
dc.subject.translated | eddy current | en |
dc.subject.translated | finite element method | en |
dc.subject.translated | non-destructive testing | en |
dc.type.status | Peer-reviewed | en |
Vyskytuje se v kolekcích: | ISTET 2013 ISTET 2013 ISTET 2013 |
Soubory připojené k záznamu:
Soubor | Popis | Velikost | Formát | |
---|---|---|---|---|
Jesenik.pdf | Plný text | 270,64 kB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/11514
Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.