Full metadata record
DC poleHodnotaJazyk
dc.contributor.authorTinoco, H. A.
dc.contributor.authorHolzer, J.
dc.contributor.authorPikálek, T.
dc.contributor.authorBuchta, Z.
dc.contributor.authorLazar, J.
dc.contributor.authorChlupová, A.
dc.contributor.authorKruml, T.
dc.contributor.authorHutař, Pavel
dc.contributor.editorLukeš, Vladimír
dc.contributor.editorRendl, Jan
dc.contributor.editorHajžman, Michal
dc.contributor.editorByrtus, Miroslav
dc.date.accessioned2018-04-17T08:16:31Z-
dc.date.available2018-04-17T08:16:31Z-
dc.date.issued2018
dc.identifier.citation20th International Conference Applied Mechanics 2018: April 9-11, 2018, Myslovice, Czech republic: conference proceedings, p. 157-162.en
dc.identifier.isbn978-80-261-0766-8
dc.identifier.urihttps://am2018.zcu.cz/AM2018_proceedings.pdf
dc.identifier.urihttp://hdl.handle.net/11025/29653
dc.format6 s.cs
dc.format.mimetypeapplication/pdf
dc.language.isoenen
dc.publisherZápadočeská univerzita v Plznics
dc.rights© Západočeská univerzita v Plznics
dc.subjecttest výstřelucs
dc.subjecttenký filmcs
dc.subjectanalýza konečných prvkůcs
dc.subjectelastické vlastnostics
dc.titleEstimation of mechanical parameters of thin films using finite element analysisen
dc.typekonferenční příspěvekcs
dc.typeconferenceObjecten
dc.rights.accessopenAccessen
dc.type.versionpublishedVersionen
dc.description.abstract-translatedThis study shows a methodology to estimate mechanical parameters of thin films by means of a bulge test and a numerical approach. The methodology is based on the combination of finite element analysis with a classical analytical method. Finite element modelling was conducted for monolayer (Si3N4) membranes of 2x2mm with the aim to approximate both the load-deflection curves experimentally measured and the classical load-deflection analytical model. Error functions were constructed and minimized to delimit a coupled solution space between Young’s modulus and Poison’s ratio. In a traditional bulge test analysis only one of the elastic properties can be determined due to that there is not unique solution in the estimations of these parameters. However, both elastic parameters were determined through the proposed numerical procedure which compares the deformed surfaces for a specific set of optimal elastic parameters computed. Results show that the estimated elastic properties agree with corresponding values determined by other methods in the literature.en
dc.subject.translatedbulge testen
dc.subject.translatedthin filmen
dc.subject.translatedfinite element analysisen
dc.subject.translatedelastic propertiesen
dc.type.statusPeer-revieweden
Vyskytuje se v kolekcích:Applied mechanics 2018
Applied mechanics 2018

Soubory připojené k záznamu:
Soubor Popis VelikostFormát 
Tinoco.pdfPlný text777,98 kBAdobe PDFZobrazit/otevřít
Zobrazit minimální záznam Zobrazit statistiky


Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam: http://hdl.handle.net/11025/29653

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.

hledání
navigace
  1. DSpace at University of West Bohemia
  2. Publikace ZČU / UWB Publications
  3. Sborníky ZČU / UWB Proceedings
  4. Applied mechanics
  5. Applied mechanics 2018