Full metadata record
DC pole | Hodnota | Jazyk |
---|---|---|
dc.contributor.author | Peković, Michal | |
dc.contributor.author | Vrtáček, Jiří | |
dc.contributor.author | Janda, Tomáš | |
dc.contributor.author | Volkmannová, Julie | |
dc.contributor.editor | Kučerová, Ludmila | |
dc.contributor.editor | Jirková, Hana | |
dc.contributor.editor | Jeníček, Štěpán | |
dc.date.accessioned | 2019-10-08T11:45:27Z | - |
dc.date.available | 2019-10-08T11:45:27Z | - |
dc.date.issued | 2019 | |
dc.identifier.citation | JIRKOVÁ, Hana ed.; JENÍČEK, Štepán ed. Proceedings PING 2019: modern trends in material engineering: 10.-13.09.2019, Pilsen. 1. vyd. Plzeň: University of West Bohemia, 2019, s. 52. ISBN 978-80-261-0879-5. | en |
dc.identifier.isbn | 978-80-261-0879-5 | |
dc.identifier.uri | http://hdl.handle.net/11025/35234 | |
dc.description.sponsorship | PING 2019 is organized with the support of funds for specific university research project SVK1-2019-002. | en |
dc.format | 1 s. | cs |
dc.format.mimetype | application/PDF | |
dc.language.iso | en | en |
dc.publisher | University of West Bohemia | en |
dc.rights | © University of West Bohemia | en |
dc.subject | indukční kalení | cs |
dc.subject | kalení | cs |
dc.subject | AHSS | cs |
dc.subject | tvrdost | cs |
dc.title | Induction hardening of steels with use of the device for incremental forming of round bars HDQT-R 30-12 | en |
dc.type | konferenční příspěvek | cs |
dc.type | conferenceObject | en |
dc.rights.access | openAccess | en |
dc.type.version | publishedVersion | en |
dc.description.abstract-translated | Induction hardening technology is mainly used for processing parts where high hardness, as well as wear-resistance and ductile core, is required. Normally induction hardening is used for spur gears, wind turbine rings, and bearings. Innovative induction hardening processes are also developed for complex automotive components such as camshafts and crankshafts. In this process, steel is heated by passing high-frequency alternating current through a coil which is considered as the primary winding of the transformer. The area where heat-treated material lies or passing through is considered as a short circuit secondary winding. Device for incremental forming of round bars HDQT-R 30-12 is equipped with such heat treatment modules which can be used for heat treatment after rolling of rods or even without rolling. Heating of steel bars is provided by five induction coils, which can heat the material faster than the chamber furnace, and there is less oxidation of the material surface. This paper shows the microstructural and hardness results from testing 42CrMo4 steel, 13CrMo4 steel, and S235JR steel after heating at different inductor coil power settings with subsequent hardening into the water bath. | en |
dc.subject.translated | induction hardening | en |
dc.subject.translated | quenching | en |
dc.subject.translated | AHSS | en |
dc.subject.translated | hardness | en |
dc.type.status | Peer-reviewed | en |
Vyskytuje se v kolekcích: | Proceedings PING 2019: modern trends in material engineering Konferenční příspěvky / Conference Papers (RTI) Proceedings PING 2019: modern trends in material engineering |
Soubory připojené k záznamu:
Soubor | Popis | Velikost | Formát | |
---|---|---|---|---|
Pekovic.pdf | Plný text | 180,18 kB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/35234
Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.