Title: Optimization of workability technological testing for open-die forging
Authors: Kotous, Jakub
Kubec, Václav
Duchek, Michal
Citation: JIRKOVÁ, Hana ed.; JENÍČEK, Štepán ed. Proceedings PING 2019: modern trends in material engineering: 10.-13.09.2019, Pilsen. 1. vyd. Plzeň: University of West Bohemia, 2019, s. 90. ISBN 978-80-261-0879-5.
Issue Date: 2019
Publisher: University of West Bohemia
Document type: konferenční příspěvek
URI: http://hdl.handle.net/11025/35261
ISBN: 978-80-261-0879-5
Keywords: otevřené zápustkové kování;zpracovatelnost;technologické testování;FEM simulace
Keywords in different language: open die forging;workability;technological testing;FEM simulation
Abstract in different language: The valid technology design of open-die forging of alloys with poor workability always presents a challenge. A method of a fast designation of open-die forging conditions is described in this paper. The simplified forging test was considered to assess the limit states during the open-die forging. As such, it should be employed in industrial scale foundries. A V-shaped testing die was designed using the finite element (FEM) simulation. The V-shaped geometry is convenient in terms of strain evaluation. A rectangular steel block was tested in a wide range of working temperatures. Based on the test results the limit states can be designated. Thus, the risk of material failure can be avoided or minimized. Experimental test results further serves for the FEM simulation validation.
Rights: © University of West Bohemia
Appears in Collections:Proceedings PING 2019: modern trends in material engineering
Proceedings PING 2019: modern trends in material engineering

Files in This Item:
File Description SizeFormat 
Kotous.pdfPlný text179,44 kBAdobe PDFView/Open

Please use this identifier to cite or link to this item: http://hdl.handle.net/11025/35261

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.