Full metadata record
| DC pole | Hodnota | Jazyk |
|---|---|---|
| dc.contributor.author | Zedan, Ousama Ahmed Abdalla | |
| dc.contributor.author | Haller, Rainer | |
| dc.contributor.author | El-Refaie, El-Sayed Mohamed | |
| dc.contributor.author | Abd Elrahman, Mohamed K. | |
| dc.date.accessioned | 2021-03-08T11:00:23Z | - |
| dc.date.available | 2021-03-08T11:00:23Z | - |
| dc.date.issued | 2020 | |
| dc.identifier.citation | ZEDAN, OAA. HALLER, R. EL-REFAIE, EM. ABD ELRAHMAN, MK. Partial discharge behavior on solid- air interfaces at AC stress condition. In: Proceedings of the 2020 International Conference on Diagnostics in Electrical Engineering (Diagnostika) : CDEE 2020. Pilsen: University of West Bohemia in Pilsen, 2020. s. 210-214. ISBN 978-1-72815-879-2, ISSN 2464-7071. | cs |
| dc.identifier.isbn | 978-1-72815-879-2 | |
| dc.identifier.issn | 2464-7071 | |
| dc.identifier.uri | 2-s2.0-85094867797 | |
| dc.identifier.uri | http://hdl.handle.net/11025/42829 | |
| dc.format | 5 s. | cs |
| dc.format.mimetype | application/pdf | |
| dc.language.iso | en | en |
| dc.publisher | University of West Bohemia in Pilsen | en |
| dc.relation.ispartofseries | Proceedings of the 2020 International Conference on Diagnostics in Electrical Engineering (Diagnostika) : CDEE 2020 | en |
| dc.rights | Plný text je přístupný v rámci univerzity přihlášeným uživatelům. | cs |
| dc.rights | © University of West Bohemia in Pilsen | en |
| dc.title | Partial discharge behavior on solid- air interfaces at AC stress condition | en |
| dc.type | konferenční příspěvek | cs |
| dc.type | conferenceObject | en |
| dc.rights.access | restrictedAccess | en |
| dc.type.version | publishedVersion | en |
| dc.description.abstract-translated | Partial discharge (PD) is one of the major factors that damage dielectric materials in medium and high voltage components. Therefore, partial discharge evaluation is generally used to observe the status of electrical insulation in high and medium voltage components used in the performance appreciation of an insulation system. In this work, partial discharge behavior on solid- air interfaces has been investigated commonly characterized as surface discharge. The investigation was performed by PD measurement as well as by adequate modelling for different insulating materials as the Natural Rubber (NR), Silicone Rubber (SiR), Ethylene Propylene Diene Monomer Rubber (EPDM) and High- Density Polyethylene (HDPE). Through modeling the partial discharge process, a better conception of the phenomenon may be achieved. The model of different homogeneous insulating materials has developed using Finite Element Analysis (COMSOL) software in parallel with MATLAB programming function. The results of the study indicate that the repetition rate and the peak apparent charge increased with the insulating material relative permittivity increase while the inception voltage does not change significantly. | en |
| dc.subject.translated | finite element analysis | en |
| dc.subject.translated | surface discharge | en |
| dc.identifier.doi | 10.1109/Diagnostika49114.2020.9214766 | |
| dc.type.status | Peer-reviewed | en |
| dc.identifier.obd | 43930553 | |
| Vyskytuje se v kolekcích: | Konferenční příspěvky / Conference papers (RICE) Konferenční příspěvky / Conference Papers (KEE) OBD | |
Soubory připojené k záznamu:
| Soubor | Velikost | Formát | |
|---|---|---|---|
| Haller_09214766.pdf | 541,33 kB | Adobe PDF | Zobrazit/otevřít Vyžádat kopii |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/42829Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.