Název: | Influence of chemical composition and parameters of heat treatment on the mechanical properties and microstructure of TRIP steels |
Další názvy: | VLIV CHEMICKÉHO SLOŽENÍ A PARAMETRŮ TEPELNÉHO ZPRACOVÁNÍ NA MECHANICKÉ VLASTNOSTI A MIKROSTRUKTURU TRIP OCELÍ |
Autoři: | Bublíková, Dagmar Jirková, Hana Jeníček, Štěpán Vrtáček, Jiří |
Citace zdrojového dokumentu: | BUBLÍKOVÁ, D. JIRKOVÁ, H. JENÍČEK, Š. VRTÁČEK, J.Influence of chemical composition and parameters of heat treatment on the mechanical properties and microstructure of TRIP steels. In. IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing LTD, 2020. ISSN 1757-8981. |
Datum vydání: | 2020 |
Nakladatel: | IOP Publishing LTD |
Typ dokumentu: | konferenční příspěvek conferenceObject |
URI: | 2-s2.0-85080957607 http://hdl.handle.net/11025/42900 |
ISSN: | 1757-8981 |
Klíčová slova: | TRIP oceli;interkritické žíhání;zbytkový austenit;RTG difrakce |
Klíčová slova v dalším jazyce: | TRIP steels;intercritical annealing;retained austenite;X-ray diffraction |
Abstrakt: | Oceli, u kterých lze dosáhnout vhodným tepelným zpracováním směsných zákalných struktur, představují pro své dobré mechanické vlastnosti širokou škálu vyžití zejména v automobilovém průmyslu. Jednou skupinou ocelí jsou oceli s efektem transformačně indukované plasticity (TRIP oceli) s obsahem uhlíku kolem 0,2%. Tepelné zpracování těchto ocelí probíhá ve dvou stupních. Nejprve je proveden ohřev do oblasti interkritických teplot mezi teploty A1 a A3. Poté následuje ochlazení na teplotu bainitické prodlevy a výdrž na této teplotě. Výsledná směsná struktura se skládá z feritu, bainitu a zbytkového austenitu. Vlivem kombinace feritu a zbytkového austenitu lze u těchto ocelí dosáhnout meze pevnosti až 1500 MPa a tažnosti až 25-40%. Pro tento experiment byly zvoleny dvě oceli se speciálním legováním podporujícím vznik TRIP struktury. Tyto oceli se od sebe lišily především obsahem chromu. Oceli byly tepelně zpracovány interkritickým žíháním. Posuzoval se zejména vliv rychlosti ochlazování na teplotu bainitické prodlevy a doba výdrže na této teplotě na mechanické vlastnosti a výslednou mikrostrukturu. Po tepelném zpracování bylo dosaženo struktur na bázi feritu, bainitu a zbytkového austenitu. Bylo dosaženo meze pevnosti až 1100 MPa při tažnosti 28%. |
Abstrakt v dalším jazyce: | Good mechanical properties of steels, in which appropriate heat treatment can produce mixed hardening structures, make them candidates for a broad range of applications, namely in the automotive industry. TRIP steels (in which transformation-induced plasticity operates) with a carbon content of approximately 0.2% are one such class of steels. Heat treatment of these steels comprises two stages. The first involve heating to the intercritical region between the A1 and A3. It is followed by cooling to a bainitic transformation temperature and holding. The resulting mixed microstructure consist of ferrite, bainite and retained austenite. Thanks to the presence of ferrite and retained austenite, the ultimate strength and elongation can reach 1500 MPa and 25-40%, respectively. The experiments presented in this paper were performed on two steels whose chemistries were specially adjusted to support formation of TRIP microstructure. The main difference between them was the level of chromium. Intercritical annealing was carried out on both steels. Aspects of interest included mainly the effect of the cooling rate above the bainitic transformation temperature and the holding time on mechanical properties and final microstructure. The heat treatment led to microstructures ferrite, bainite and retained austenite. The strength was under 1100 MPa and elongation reached 28%. |
Práva: | © IOP Publishing |
Vyskytuje se v kolekcích: | Konferenční příspěvky / Conference Papers (RTI) OBD |
Soubory připojené k záznamu:
Soubor | Velikost | Formát | |
---|---|---|---|
Bublíková_2020_IOP_Conf._Ser.__Mater._Sci._Eng._723_012004.pdf | 1,7 MB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/42900
Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.