Title: Is it possible to process sintered carbides by selective laser melting technology?
Authors: Bricín, David
Citation: HOŘEJŠÍ, Petr, ed.; VANĚK, Václav, ed. Soutěžní přehlídka studentských a doktorských prací FST 2019: sborník příspěvků: 25. dubna 2019. 1. vyd. Plzeň: Západočeská univerzita v Plzni, 2019, s. 121-126. ISBN 978-80-261-0860-3.
Issue Date: 2019
Publisher: Západočeská univerzita v Plzni
Document type: konferenční příspěvek
URI: http://hdl.handle.net/11025/34379
ISBN: 978-80-261-0860-3
Keywords: WC-Co;SLM;pórovitost;hustota energie;konstrukce
Keywords in different language: WC-Co;SLM;porosity;energy density;builds
Abstract in different language: The aim of this article is to introduce to the reader problems which is connected with processing of WC-Co composite material by the technology known as SLM (Selective Laser Melting Technology). The biggest problem associated with the material processing process is the porosity of the prototype builds. The work deals with what the final porosity of the product is affected by parameters of printing process and by raw material properties used for it. The presented results were obtained by performing metallographic analysis of builds made of various types of WC-Co powder mixtures under different processing parameters of them. Metallographic analysis was performed using light and electron microscopy techniques. These analyses were further supplemented by the evaluation of mechanical properties of prototypes by the test of hardness, compressive strength and dynamic resistance of the product by the impact test.
Appears in Collections:Soutěžní přehlídka studentských a doktorských prací FST 2019
Soutěžní přehlídka studentských a doktorských prací FST 2019

Files in This Item:
File Description SizeFormat 
Bricín.pdfPlný text1,43 MBAdobe PDFView/Open

Please use this identifier to cite or link to this item: http://hdl.handle.net/11025/34379

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.