Název:	Characterization of low cycle fatigue parameters of rotor steel using sub-sized specimens
Autoři:	Procházka, Radek Konopík, Pavel
Citace zdrojového dokumentu:	JIRKOVÁ, Hana ed.; JENÍČEK, Štepán ed. Proceedings PING 2019: modern trends in material engineering: 10.-13.09.2019, Pilsen. 1. vyd. Plzeň: University of West Bohemia, 2019, s. 76. ISBN 978-80-261-0879-5.
Datum vydání:	2019
Nakladatel:	University of West Bohemia
Typ dokumentu:	konferenční příspěvek conferenceObject
URI:	http://hdl.handle.net/11025/35252
ISBN:	978-80-261-0879-5
Klíčová slova:	nízká únava cyklu;vzorek menší velikosti;korelace digitálního obrazu
Klíčová slova v dalším jazyce:	low cycle fatigue;sub-sized specimen;digital image correlation
Abstrakt v dalším jazyce:	The paper is dealing with strain controlled cyclic testing method employing a novel strain-control technique based on digital image correlation (DIC) in low-cycle fatigue (LCF) region. The cyclic behaviour of 22CrMoNiWV 8-8 rotor steel was investigated on sub-sized round specimens with a diameter of 2 mm in gage length and total length of 20 mm. These results were compared with results obtained using conventional specimens designed in accordance with the ASTM E606 standard. The attention was paid to confirm the suitability of the proposed sub-sized geometry, testing set up and procedure. The test procedure and results obtained enabled to record hysteresis loops, construct Manson-Coffin curves and obtain cyclic material properties in LCF region.
Práva:	© University of West Bohemia
Vyskytuje se v kolekcích:	Proceedings PING 2019: modern trends in material engineering Proceedings PING 2019: modern trends in material engineering

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.