Title:	The effect of mechanical surface pre-treatment on the strength of the adhesive joint of high strength sheets
Authors:	Kejzlar, Pavel Voleský, Lukáš Pilvousek, Lukáš
Citation:	JIRKOVÁ, Hana ed.; JENÍČEK, Štepán ed. Proceedings PING 2019: modern trends in material engineering: 10.-13.09.2019, Pilsen. 1. vyd. Plzeň: University of West Bohemia, 2019, s. 70. ISBN 978-80-261-0879-5.
Issue Date:	2019
Publisher:	University of West Bohemia
Document type:	konferenční příspěvek conferenceObject
URI:	http://hdl.handle.net/11025/35247
ISBN:	978-80-261-0879-5
Keywords:	lepicí spoj;soudržnost;síla
Keywords in different language:	adhesive joint;cohesion;strength
Abstract in different language:	Nowadays, in the car body parts production, the quenching is often replaced by adhesive joints. The adhesive joints have a lot of advantages – they allow to keep the protective layer, enable to join different material and prevent from the formation of heat affected zones. With respect to passenger’s passive safety, plenty of car body parts are manufactured of high strength steel sheets. The body parts are hot-formed at a temperature of 900 °C to the desired shape followed by subsequent rapid quenching to achieve the required strength. The sheets are covered with an AlSi 60/60 layer which should protect them from high-temperature oxidation during the forming process. However, brittle intermetallic interlayers form during the high-temperature treatment due to the reaction of iron from the substrate with Al/Si from the protective cover, which negatively affects the final strength of adhesion joint. The paper deals with the comparison of different possible ways of removing the layer on the final strength.
Rights:	© University of West Bohemia
Appears in Collections:	Proceedings PING 2019: modern trends in material engineering Proceedings PING 2019: modern trends in material engineering

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.