Title:	Combined accelerated climatic tests of electrically conductive adhesives
Authors:	Žák, Pavel Tučan, Marek Kudláček, Ivan
Citation:	Electroscope. 2010, č. 3, EDS 2010.
Issue Date:	2010
Publisher:	Západočeská univerzita v Plzni, Fakulta elektrotechnická
Document type:	konferenční příspěvek conferenceObject
URI:	http://147.228.94.30/images/PDF/Rocnik2010/Cislo3_2010_EDS/r4c3c11.pdf http://hdl.handle.net/11025/584
ISSN:	1802-4564
Keywords:	elektricky vodivá lepidla;zrychlené klimatické zkoušky
Keywords in different language:	combined accelerated climatic tests;electrically conductive adhesives
Abstract in different language:	Electrically Conductive Adhesives (ECAs) are one of the relatively new and quickly expanding replacements for the use of classic lead-based solders in the electronics industry. However this expansion comes at a cost – and one of the most important aspects of this cost is the spreading of ECAs into less than favorable operating environments. While in the past ECAs were used mostly on static LCD screens, nowadays their use did spread already into the realm of portable devices and car electronics. This of course means, that such devices are subjected to much harsher climatic and mechanical stresses than table-mounted flat screens. However, there is a lack of a long-term experience with such applications and thus it is hard to assess the reliability of electronic devices using ECAs. To expand our knowledge about their reliability in such conditions, a series of experiments was undertaken and will be presented in this article.
Rights:	Copyright © 2007-2010 Electroscope. All Rights Reserved.
Appears in Collections:	Číslo 3 - EDS 2010 (2010) Číslo 3 - EDS 2010 (2010)

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.