Diplomové práce / Theses (KAE) Collection home page

Subscribe to this collection to receive daily e-mail notification of new additions RSS Feed RSS Feed RSS Feed
Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 235
Hás, Martin
Návrh a aplikace "systému pro měření protokolem CCP/XCP" pro mikroprocesory

This diploma thesis deals with the design and the realization of a system with a microcontroller, which communicates with its master system via the measurement and calibration protocol XCP realized over a CAN bus. XCP protocol serves primarily for the purpose of the acquisition...

Nagler, Andreas
Integrace dat stroje z "Hydraulikcheck" do SAP použitím formuláře

The service Hydraulikcheck provided by Dorst Technologies, checks hydraulic components in their machines. Documenting of the measured values is done by hand up until today. With this thesis the goal is to redesign the entire measuring process by integrating digital technology. The Data&...

Born, Eugen
Simulation of a double ridge horn and a log-periodic dipole antenna for EMC measurement

The goal of this thesis is designed and modeled two antennas, a double ridged horn antenna (DRHA) and a log-periodic dipole antenna (LPDA), with a bandwidth from 1 GHz to 6 GHz with CST Microwave Studio (CST MWS) to be built in the near future and used for ...

Ježek, Vojtěch
Zjednodušená simulace analogové části zapojení ECU a vozidla

The aim of this diploma thesis was to design and create simulator of analog electronic circuits, which are present in the automotive control unit. First part describes the differences between digital and analog simulation. Next part is theoretical analysis of methods for analysis o...

Jeníček, Jakub
Implementace prediktivního řízení v obvodech programovatelné logiky

This thesis is focused on the implementation of a specific example of ADMM predictive control method in the circuits of programmable logic. Part of the thesis is a description of the behavior of the implemented system and its parts. In addition, initialization and confi...

Pauli, Dominik
Řídicí systém pro autonomní dron

This thesis deals with proposal of navigation system for an autonomous drone. The proposal is described and implementation is made using AR drone 2.0 using JavaScript and TypeScript programming languages. Prototype is implemented as server aplication.

Maška, Martin
Bezkontaktní optické snímání gramofonového záznamu

This thesis deals with the non-contact optical based methods of retrieving a phonograph record. It presents the use of the laser beam on a theoretical level, while the practical part concerns photographing of grooves using the raster industrial camera with micro-lenses. The...

Kučera, Tomáš
Úprava vícekanálového audio převodníku pro měřicí účely

The aim of this work is to analyse the professional converter Behringer ADA8000 ways of use for measurement proposes and to suggest, implement and verify the alternation of convertor's input circuits. The theses propose is to find out a commercially available solution of ...

Folkman, Luděk
Konstrukce akustických zdrojů zvuku pro ověřování volného akustického pole

This thesis is aimed at the design and construction of acoustics sources for verification of parameters of free acoustic field. The free acoustic field can be simulated in the anechoic chamber, and the qualification of anechoic chambers can be assessed using these sources. These&#x...

Křeček, Michael
Komunikační systém s vícestavovou rozmítanou modulací

The aim of this thesis is the experimental software implementation of a communication system working in real-time. Thesis follows up on [4], where author created software solution of the modulator and demodulator utilizing M-ary chirp modulation in a MATLAB environment. This...

Bubílek, Aleš
Využití technologie IoT

The main goal of this diploma thesis is to design and implement at least one application that are suitable for LPWAN technology, in addition to the research of the used solutions and technologies used in IoT. Theoretical part deals with IoT technologies and its elements, ...

Flachs, Tomáš
Aplikace softwarového rádia pro zpracování GNSS signálů

With decreasing cost and increasing availability of the Software Definated Radio transmitters increases the possibility of using the attacks to the Global Navigation Satellite System (GNSS) receivers. This master thesis deals with the application of software-defined radio for processing of GNSS&#...

Bauer, Tomáš
Rozšíření Univerzální řídicí jednotky USG2 o automobilový Ethernet

This thesis deals with design of extensional module with automotive Ethernet for Universal electronic control unit USG2 in collaboration with MBtech Bohemia s.r.o. In the first part, it is introducing usage of Ethernet in automotive industry and why the widely used IT Ethernet...

Antal, David
Využití senzoru Grid-Eye pro gestové ovládání

The aim of the thesis is to find a usage for Grid-EYE sensor in the field of gesture recognition and control. To meet this goal, it was needed to learn about basic principles of gesture recognition. A test board with given sensor and microcontroller for processing an...

Zeis, Zbyněk
Meteostanice pro domácí využití

This diploma thesis focuses on the design and implementation of a weather station for home use. The weather station is composed of two units (main and remote) with each other wirelessly communicating at 868 MHz. For the realization of the device, it was first ...

Przechowski, Kryštof
Rozhraní pro komunikaci s integrovaným bootloaderem v mikrokontroléru STM32

The master thesis deals with an integrated bootloader in microcontrollers STM32, it describes how the bootloader works, its connection and how to use it. Serial communication with the bootloader and the PC is introduced. The firmware for communication between the PC and the bootloa...

Průcha, Václav
Statická analýza kódu v souladu s požadavky normy EN50128

This thesis investigates how and where static code analysis can be integrated into a development process of safety relevant SW namely SW of Train Control and Monitoring System of a locomotive. Since development of SW for traction vehicles is subject of assessment according to...

Hujer, Lukáš
Spínaný laboratorní zdroj s nastavitelnými výstupními parametry

The thesis is focused on the design and realization of a functional sample switching power supply. I created a block diagram of the source and subsequently described the individual parts from which it is composed. A part of the thesis is also a theoretical analysis of...

Čížek, Lukáš
Kytarový DSP multiefekt

The diploma thesis is focused on the design of a digital effect prototype unit that is intended for use with electric guitar. Similar devices are commonly called as multi-effects. The multi-effect is based on the Nucleo-F767ZI development kit from ST Microelectronic and audio codec ...

Svoboda, Miroslav
Návrh, analýza a aplikace řízení aktuátoru hmatové zpětné vazby a systému snímání tlaku pro dotykové vstupní zařízení v automobilu

In this diploma work written in English, the electric part of an actuator for haptic feedback has been calculated, simulated and subsequently designed. Furthermore, control and measurement circuits were simulated and a printed circuit board was then designed. This software has&#...

Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 235