Diplomové práce (KME) / Theses (DME) Domovská stránka kolekce Zobrazit statistiky

Procházet
Přihlásit se k zasílání denních e-mailů o novinkách RSS Feed RSS Feed RSS Feed
Záznamy kolekce (řazeno podle Datum zaslání v sestupně pořadí): 1 až 20 z 121
Pražák, František
Stavebně technologický projekt - ČOV Hostivice, rekonstrukce a intenzifikace

The master´s thesis is aimed at the elaboration of the construction and technological project of the reconstruction and intensification of Hostivice sewage treatment plant. The thesis is divided into several parts. The first part deals with the introduction to the issue of the sewa...

Hartlová, Jana
Biomechanická studie fixací zlomenin křížové kosti

The thesis is focused on a unilateral transforaminal sacral fracture. An experimental study, performed on orthopaedic solid-foam pelvic models, was realised to investigate the response of the pelvic model to mechanical loading. The models were tested in the intact state, the fractured s...

Houdek, Roman
Víceškálové modelování perfúze v tkáních

The diploma thesis deals with two main subjects; the modeling of some important phenomena relating to a blood perfusion in a tissue of liver and the modeling a transport of oxygen into an animal tissue. Due to a complexity of these problems, there are introduced a si...

Polívka, Miroslav
Analýza přestřešení obchodní pasáže, uliční prostor 12 m

This Thesis consists of the design of the best solution and subsequent structural assessment of the steel structure of the roofing of the shopping mall, with light span of 12m. The aim of the Thesis is to analyze the architectural and structural form and to&#...

Křepel, Aleš
Přestřešení autobusového stání ve variantním řešení

This thesis presents a comparison of variants roofing of bus stand. The dissertation compares four types of roofing. These are a spatial rods of steel construction. The roofing is designed in continuity of the service building of the bus station. The thesis contains&#x...

Skálová, Kateřina
Revitalizace zámku Palvínov ve variantním řešení vybraných konstrukčních celků s ekonomickým vyhodnocením

This diploma thesis deals with the design of revitalization of the Palvínov castle with the variant solution of selected structural units with economic evaluation. The thesis target is to design and selection of a suitable dispositional design, setting up load cases, and structura...

Hovorková, Pavla
Víceškálové modelování pulzačního proudění krve v reálných modelech velkých cév

The thesis is aimed at the multiscale modelling of pulsatile blood flow in a patient-specific model of large vessels, consisting of the aortic arch and corresponding middle-sized arteries damaged by atherosclerosis. To be able to perform simulations for physiologically correct values of ...

Bischof, Luboš
Analýza Vierendeelova nosníku, řešeného dle EC s modelovou podobností

This thesis deal with the Vierendeels truss and its analysis. In the thesis is written history of Vierendeels truss and example of its use. This truss is usually used in civil and transportation construction. Furthermore there is done analysis of the Vierendeels truss b...

Fayová, Tereza
Numerická analýza bezpečnosti pasažérů při převrácení osobního automobilu

The diploma thesis is focused on the safety analysis of passengers in the event of a car rollover overturning (so called rollover). The aim of the thesis is to test the suitability of the virtual body model VIRTHUMAN based on the multi-body system for this type of&#x...

Týma, Michal
Stavebně technologický projekt - Porovnání výstavby různých konstrukčních systémů věžových rozhleden, datových převaděčů

The presented thesis is focused on structural and technological project comparing the construction of various structural systems tower towers, data converters. The main goal of my work is the comparison and creation of statements of quantities, budgets, and schedules tower towers, data...

Emmer, Aleš
Vibroakustická analýza pojízdného šroubového kompresoru

The main objective of this thesis is setting up the vibroacoustic model of a mobile screw compressor to be able to determine the amount of radiated sound and to propose subsequent adjustments leading to the reduction of radiated noise. At first, different types of compressors&...

Zdvořanová, Adéla
Koncepční řešení překlenutí terénní překážky - objekt bude využíván pro volno časové aktivity

The main objective of this master's thesis is a conception of passing a terrain obstacle. The structure will be also serving as a place for freetime activities. Thesis consists of the design of the object, steel construction and its boundary conditions. The design is creat...

Bygarová, Ivana
Ekonomicko-technologické vyhodnocení polyfunkčního objektu a jeho stavebně technologická část

The content of the thesis is the implementation of the concept of a construction-technological project including a technical report with the description of the building and the overall concept. In addition, some parts, such as site equipment, building mechanization, technology prescription a...

Pilík, Jan
Porovnání variant výstavby zděných objektů z hlediska nákladů, technického řešení a doby výstavby

Project includes examination several kinds of masonry systems from three aspects such as purchase price, time building intensity and technological processes while building up. In the project is comparation of 15 masonry variants made from ceramic, concrete, aerated concrete and sand-lime mat...

Soldátová, Veronika
Přehled a hodnocení technických a konstrukčních vlastností panelových systémů užívaných v západních Čechách. Obecná problematika těchto soustav a sídelních celků před revitalizací a možnosti dalšího využití.

The theme of this diploma thesis is focused on panel buildings. Firstly, an overview of selected most frequently used panel systems PS 69 and T06 B will be elaborated with focus on West and South Bohemia. Technical, and mainly constructional properties of these panel systems&#...

Hrdlička, Václav
Návrh ramenního chrániče motocyklisty

This thesis contain a basic overview of materials usable in motorcycle armors including a summary of their characteristic properties. The thesis is also concerned with experimental tests of partial materials used in several already distributed motorcycle armors. It was about tensile, compres...

Kinský, Tomáš
Návrh výškové administrativní budovy

This thesis deals with designing structural variants administration building. For the variant was designed reinforced concrete skeleton. As a model design was created by 3D model in Dlubal RFEM 5.01. The results of the program were used for the calculation of the main elements ...

Menclová, Eva
Počítačové modelování jízdních vlastností formule Student

This master thesis deals with the computer modeling of the handling of the formula Student with the focus on the tire modeling. Functions of the tire, forces and torques acting on the tire and the ways of the tire modeling are introduced. This thesis is focused on&#x...

Taubrová, Renata
Zdokumentování výstavby panelového systému PS69 v Plzni, varianty řešení objektů a návrh úprav dvousekce objektu v podmínkách požadavků a předpisů po roce 2016

In my diploma thesis, I am dealing with the panel system PS 69. The first part of my diploma thesis describes the evolution of the tower blocks based on available information. This thesis is elaborated as a catalogue overview of individual structural elements, capturing their&...

Šlechtová, Martina
Rozbor požadavků pro návrh domů s pečovatelskou službou pro seniory

This master thesis is supposed to gather all materials accords to norms, standards and law ordinance of nursing homes. In the thesis the materials had been analyze and based on them had been done accession of chosen objects. Evaluation of buildings had been done with the&...

Záznamy kolekce (řazeno podle Datum zaslání v sestupně pořadí): 1 až 20 z 121